Switching measurement data display

Press MODE to switch the display of data being measured.

* The data displayed changes depending on the state of the sensor connection and the screen customization settings. The following gives an example of initial configuration of the measurement screen.

* During initial configuration, screens 3 through 5 are undefined and thus not shown. However, this setting can be changed. Use a smartphone (Cateye Cycling™) to add screens or to change screen segments or measurement data.
Changing the measurement screen

* Measurement data will be displayed as [--] if no sensor signal is received. (Excluding current speed which can be measured by GPS)

Copyright © 2020 CATEYE Co., Ltd.