2. Pairing
Important
This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app.
To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual.
The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.
* For the latest information on the smartphones that are compatible with Cateye Cycling™ operations, see “Cateye Cycling™ Recommended Devices”.
Pairing via Bluetooth
Smartphone
1. From the startup screen, tap [Start] and begin pairing.
* If the startup screen does not appear, tap (Startup) at the top left of the screen to display it.
2. Shake the sensor, or rotate the crank where it is mounted to transmit the signal.
When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone.
Tap [Pair to Device]. The verified sensor (CATEYE CDC-30) is displayed under [Device] and pairing is completed.
* When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (CDC).
Note
• When using the PADRONE SMART+ in Sensor Direct Mode:
Connect the PADRONE SMART+ to Cateye Cycling™, and then transmit the paired sensor information.
PADRONE SMART+: Connecting smart computer and smartphone
* This sensor cannot be used with STRADA SMART / PADRONE SMART in Sensor Direct Mode. Use in Mirror Mode instead.
• When using PADRONE SMART+:
Cadence will not be displayed on the measurement screen in default configuration.
Customize the measurement screen to display cadence measurements.
When using ANT+ to perform pairing or pairing with an other brand computer
Refer to the instruction manual of the computer.
Copyright© 2022 CATEYE Co,.Ltd.