Copyright © 2021 CATEYE Co., Ltd.

How to use

CATEYE PADRONE SMART +

Pairing a sensor or a Shimano DI2 system with the Cateye Cycling™ app

Switching to Sensor Direct Mode

Switch from Mirror Mode to Sensor Direct Mode.

 

Smartphone

1. Close Cateye Cycling™ or set [Connect] to OFF.

Connect OFF

Smart computer

2. From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode.

Smartphone search screen

(1 second)

Measurement screen

* Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.

S (Flash): When the speed signal is received *1

C (Flash): When the cadence signal is received *1

H (Flash): When the heart rate signal is received

P (Flash): When the power signal is received

(Flash): When the Shimano DI2 system signal is received

*1: With the speed/cadence (ISC) sensor, S and C are flash simultaneously.

Important

Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.

Pairing a smart computer with a sensor

Tire circumference setting