1. Set up the computer
Use these buttons for setup.
1. Clear all data (initialization)
Initialize the computer.
Press the AC button on the back of the computer.
The whole display turns on and then switches to the speed unit setting screen.
2. Set the speed unit
Select either “km/h” or “mph.”
Press the MODE button to switch between speed units.
After selecting the unit, press the MENU button to confirm.
Setting the speed unit
Confirm
3. Enter the tire circumference
Enter the tire circumference of your bicycle.
Refer to “Determine tire circumference” to enter the 4-digit tire circumference (mm). (0100 to 3999 mm)
• Press the MODE button : The flashing value increase
• Press and hold the MODE button : Move digit
After entering the circumference, press the MENU button to confirm.
Entering the tire circumference
Increase the value
Move digit
(Press and hold)
Confirm
4. Set the clock display
Select either “12h” or “24h.”
Press the MODE button to switch between time formats.
After selecting the format, press and hold the MODE button to confirm.
Clock display
Confirm
(Press and hold)
5. Set the hour
Enter the current hour.
Press the MODE button to increase the flashing value (hour).
After setting the hour, press and hold the MODE button to confirm.
Hour
Increase the value
Confirm
(Press and hold)
6. Set the minute
Enter the current minute.
Press the MODE button to increase the flashing value (minute).
After setting the minute, press the MENU button to confirm.
Minute
Increase the value
Confirm
Setup is completed
The measurement screen appears.
Now, setup of the computer is completed.